Board Setup

Mezzanine fastening hardware

For mechanical fastening of the mezzanine card to the carrier board, the Ethernet FMC comes with 2x hex standoffs, and the Robust Ethernet FMC comes with 4x hex standoffs. It is recommended to use a machine screw on each of these standoffs to fix the mezzanine card to the carrier board.

The hex standoff and machine screw part numbers are listed below:

  • Hex standoff, Thread M2.5 x 0.45, Brass, Board-to-board length 10mm
    Part number: V6516C
    Manufacturer: Assmann
  • Machine screw, Thread M2.5 x 0.45, Length (below head) 4mm, Stainless steel, Phillips head
    Part number: 90116A105
    Supplier: McMaster-Carr